Genshin Impact Primordial Jade Winged Spear Digital 3D files
Difficulty: Experienced. Due to the complexity of this weapon and how the jade spikes float you may need to have some experience modelling if you plan to change certain aspects of this weapon such as the size of the pvc pipe used or how the spikes float. I bought a 3/4in pvc pipe from either Homedepot or Lowes (I forget which one) that has thick outer walls that has exactly 26.9mm diameter. So if you don't use the exact pipe i used it may be difficult to assemble the spear. For the floating spikes they are connected to the blade via acrylic panels that is (.9in thick)i cut out with my laser cutter. If you don't have access to cut those out i have included 3d printable panels you can print out and use instead.
PLEASE READ: This is the Digital 3D files to be able to print your own Spear. This is not a physical product and no refunds will be issued after purchase. You will automatically receive the files in a zip file so you will need to unzip with a program like winrar. files will be sent to the email you used to check out so make sure your email is correct. Once purchased, all files will be sent and there is a no-refund policy. These are your own files for personal use only, do not share them online. -Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced. For commercial use please contact me directly
Included is a RAW Version of the model that you can slice and remodel the way you like. You will need to remodel it to fit a new pvc pipe. 2nd is an unsliced version of the model that you can slice accordingly to fit your printer but still sliced to fit a pvc pipe that has an inner hole of 3/4in exactly 26.9mm in diameter when measuring the outer wall as well . The third is the sliced version i used to fit my Prusa mk3s printer. 3/8in wooden dowels were used as support for my version. I also modelled alignment pegs for the floating spikes and the pommel. Instructions will be included with this version.
I recommend using a 15% infill but you can get away with 10% if need be.
Join my discord if you need to contact me on how to print your item. Or just to show your progress or see what is being made next! Also if changes are made to model i will update the discord and model on the site and you should receive an email with updated model in the future,
https://discord.gg/2He48dJHy4
For further questions please message me
